RTU5024 SMS-команды

22 команд. Нажми кнопку копирования, чтобы скопировать пример, и вставь его в SMS-приложение.

Примечание: Commands use NO # delimiters (unlike Callny). Password is 4 digits. Up to 200 authorized numbers (positions 001-200). Commands must be CAPS LOCK. Device will NOT reply if command is invalid (for security).

Пароль по умолчанию: 1234

Initialize (REQUIRED first step)

admin

Register the module's SIM card number. This is the FIRST command you must send. Use 00 prefix instead of +.

Синтаксис

{pwd}TEL{moduleSIM}#

Пример

1234TEL00861351015#

Ответ

Set Success!

Sync clock

admin

Set the module's internal clock. Required for time-limited users to work correctly.

Синтаксис

{pwd}T{YYMMDDHHmm}#

Пример

1234T2603291530#

Ответ

Set Time OK!

Change password

admin

Change device password to new 4-digit password.

Синтаксис

{pwd}P{newpwd}

Пример

1234P6666

Ответ

Password changed to {newpwd}, please remember it carefully.

Add permanent user

admin

Add authorized user to slot (001-200). Always allowed to call and control.

Синтаксис

{pwd}A{slot}#{phone}#

Пример

1234A003#123456#

Ответ

User added confirmation

Add time-limited user

admin

Add user with access limited to a date/time range. Clock must be synced first.

Синтаксис

{pwd}A{slot}#{phone}#{startYYMMDDHHmm}#{endYYMMDDHHmm}#

Пример

1234A016#123456#1502050800#1502051000#

Ответ

User added confirmation

Query user by slot

admin

Check which phone number is stored at a position.

Синтаксис

{pwd}A{slot}#

Пример

1234A002#

Ответ

Phone number at slot or Empty

Batch query users

admin

Query authorized numbers from slot range. Returns multiple SMS (10 numbers per SMS).

Синтаксис

{pwd}AL{slotStart}#{slotEnd}#

Пример

1234AL002#050#

Ответ

List of users across multiple SMS

Delete user

admin

Remove authorized number at position (or overwrite with new number).

Синтаксис

{pwd}A{slot}##

Пример

1234A002##

Ответ

User deleted

Allow all callers

admin

Allow any phone number to trigger the relay. WARNING: free access for anyone.

Синтаксис

{pwd}ALL#

Пример

1234ALL#

Ответ

Allow all mode set

Authorized users only (default)

admin

Only authorized numbers can trigger the relay. Recommended setting.

Синтаксис

{pwd}AUT#

Пример

1234AUT#

Ответ

Authorized only mode set

Set relay close time

admin

How long relay stays closed (ON) after call. 000=0.5s latch, 001-998=seconds, 999=stays on until next call.

Синтаксис

{pwd}GOT{seconds}#

Пример

1234GOT030#

Ответ

Relay time set

Configure relay ON SMS

admin

Set who receives SMS when relay turns ON and what it says. a=first user (0/1), b=caller (0/1).

Синтаксис

{pwd}GON{ab}#{content}#

Пример

1234GON11#DoorOpen#

Ответ

Confirmation set

Configure relay OFF SMS

admin

Set who receives SMS when relay turns OFF and what it says.

Синтаксис

{pwd}GOFF{ab}#{content}#

Пример

1234GOFF00#DoorClose#

Ответ

Confirmation set

Disable relay ON SMS

admin

No SMS notification when relay turns ON.

Синтаксис

{pwd}GON##

Пример

1234GON##

Ответ

ON notification disabled

Disable relay OFF SMS

admin

No SMS notification when relay turns OFF.

Синтаксис

{pwd}GOFF##

Пример

1234GOFF##

Ответ

OFF notification disabled

Relay ON (by SMS)

all authorized

Turn relay on via SMS command. Close time follows GOT setting.

Синтаксис

{pwd}CC

Пример

1234CC

Ответ

Relay ON (or custom GON content)

Relay OFF (by SMS)

all authorized

Turn relay off via SMS command.

Синтаксис

{pwd}DD

Пример

1234DD

Ответ

Relay OFF (or custom GOFF content)

Check status

all authorized

Query relay state, signal strength, and device info.

Синтаксис

{pwd}EE

Пример

1234EE

Ответ

Relay status, GSM signal value, firmware info

Set auto-report interval

admin

Auto-send status report to first user every X hours. 000=disabled (default).

Синтаксис

{pwd}T#{hours}#

Пример

1234T#024#

Ответ

Auto-report set

Query auto-report interval

admin

Check current auto-report interval.

Синтаксис

{pwd}T#

Пример

1234T#

Ответ

Current interval in hours

Query IMEI and firmware

admin

Get the module's IMEI code and firmware version.

Синтаксис

{pwd}IMEI#

Пример

1234IMEI#

Ответ

IMEI and firmware info

Factory reset

physical button or SMS

Reset to factory settings. Authorized users are preserved. Can also hold reset button on device.

Синтаксис

RESET

Пример

RESET

Ответ

Device restarts
Установить GateOpener