# G202 PLUS user manual

> Free G202 PLUS user manual. Default password 1234, full SMS command table, wiring diagram, troubleshooting, and the original manufacturer PDF. Callny / Daniu GSM / LPSECURITY.

Canonical: https://gate-opener.app/manuals/callny-g202/

Last reviewed: May 23, 2026 10 min read

Everything you need to install, configure and troubleshoot the G202 PLUS GSM gate opener module: the default password, every SMS command, the wiring diagram and the original manufacturer PDF.

**At a glance:** The G202 PLUS is a GSM gate opener module manufactured by Callny / Daniu GSM / LPSECURITY. The default password is `1234`. It supports up to 999 authorized phone numbers across 1 relay output and runs on DC 9-36V. Commands are sent over SMS using the [Callny protocol](https://gate-opener.app/hardware/callny-g202/commands/).

## Download the official PDF manual

The original Callny / Daniu GSM / LPSECURITY factory manual in PDF form:

[Download G202 PLUS manual (PDF)](https://gate-opener.app/manuals/G202_PLUS_G203_quick_guide_V2.1.pdf)

If the PDF is missing diagrams or your hardware shipped with a different version, please [let me know](mailto:hello@gate-opener.app) and I will add the alternative version.

## Hardware specifications

|  |  |
| --- | --- |
| Default password | 1234 |
| Maximum authorized users | 999 |
| Relay outputs | 1 |
| Protocol family | Callny |
| Power supply | DC 9-36V |
| SIM card type | Nano SIM |
| Relay rating | 3A / 240VAC |
| Operating temperature | -10 to +60 C |
| Dimensions | 96.5 x 50 x 31.5 mm |

These are the manufacturer's published values. The same hardware is sold under several brand names — if your unit shows a different sticker, the protocol and command set are still identical. Also known as: G202, G202 PLUS, CY305, CN G202.

## First-time setup checklist

Before sending any SMS commands, work through this list. Skipping a step accounts for most of the support emails I receive.

1. Insert a working SIM card into a regular phone. Confirm voice and SMS work. Disable the SIM PIN.
2. Insert the SIM into the G202 PLUS. Connect DC 9-36V.
3. Wait for the signal LED to blink slowly (network registered). This takes 30-90 seconds on first power-up.
4. From an authorized phone, send the change-password command to replace the default `1234` with your own.
5. Add yourself as the first authorized user. Confirm by calling the SIM number — the gate should pulse.
6. Wire the relay output to your gate motor's trigger input (typically labelled "ON", "MAN", "OPEN").

The detailed setup walkthrough with example SMS commands is in the [G202 PLUS setup guide](https://gate-opener.app/blog/callny-g202-setup-guide/).

## SMS command reference

Every command for the G202 PLUS, copy-pasteable. Replace `{pwd}` with your own password. The full annotated reference with response examples is on [/hardware/callny-g202/commands/](https://gate-opener.app/hardware/callny-g202/commands/).

### Add admin user (auto-assign slot)

Add admin user with auto-assigned slot ID

Syntax: `{pwd}#TEL{phone}#DEF#`

Example: `1234#TEL+31612345678#DEF#`

### Add admin user (specific slot)

Add admin user with specific slot ID (001-999)

Syntax: `{pwd}#TEL{phone}#{userID}#`

Example: `1234#TEL+31612345678#001#`

### Add normal user (auto-assign, G203 only)

Add normal user (can only call to open, cannot manage users)

Syntax: `{pwd}#NORTEL{phone}#DEF#`

Example: `1234#NORTEL+31612345678#DEF#`

### Add normal user (specific slot, G203 only)

Add normal user with specific slot ID

Syntax: `{pwd}#NORTEL{phone}#{userID}#`

Example: `1234#NORTEL+31612345678#005#`

### Delete user by slot

Remove user by slot ID. Super admin cannot be deleted.

Syntax: `{pwd}#TEL#{userID}#`

Example: `1234#TEL#002#`

### Delete user by phone

Remove user by phone number

Syntax: `{pwd}#DELTEL#{phone}#`

Example: `1234#DELTEL#+31612345678#`

### Query user by slot

Check which phone number is in a slot

Syntax: `{pwd}#TEL{userID}?`

Example: `1234#TEL001?`

### Query user by phone

Check if a phone number is authorized

Syntax: `{pwd}#QRYTEL{phone}?`

Example: `1234#QRYTEL+31612345678?`

### Query all users

List all authorized users with roles

Syntax: `{pwd}#TELALL?`

Example: `1234#TELALL?`

### Relay ON (pulse)

Turn relay on for the configured delay time

Syntax: `{pwd}#ON#`

Example: `1234#ON#`

## Troubleshooting

If a command returns *Error password*, double-check that you are sending the command from an authorized phone using exactly the syntax above. The Callny firmware is strict about case, spacing, and the `#` delimiters. Common causes:

- Sending from a number that is not on the authorized list (call the gate first to test).
- Old password still cached after a factory reset. The post-reset default reverts to `1234`.
- Lowercase command keywords. Callny commands accept lowercase, but spacing matters.
- Extra spaces or autocorrect inserted by your phone keyboard. Disable predictive text for the gate's SIM number.

The full troubleshooting guide with diagnostic SMS commands and signal-strength checks lives at [rtu5024-troubleshooting](https://gate-opener.app/blog/rtu5024-troubleshooting/).

## Skip the SMS commands entirely

The whole reason this site exists is that nobody enjoys typing SMS commands like `{pwd}#TEL+31612345678#001#` from memory. GateOpener gives you buttons, forms, and confirmation screens — same hardware, clean interface.

[Get GateOpener](https://gate-opener.app/download/)